Ways of reproduction and transfer of the natural gas combustion heat and density units in Ukraine
In: Український метрологічний журнал, 2018-12-29
Online
unknown
Zugriff:
The article presents the rationale for the need to develop in Ukraine the industry of metrological support for measuring the heat of combustion and density of natural gas. The analysis of available state primary measurement standards of energy units and molar fraction of gas components regarding the possibility of implementing the reproduction of these units has been carried out. The arguments on the need to perform a conformity assessment of these measuring instruments in accordance with the requirements of Technical Regulations have been provided. The example of the implementation of the reproduction of units of heat of combustion and density of natural gas in Germany in the framework of the implementation of the GERG project. The concept of building a reference complex based on a gravimetric setup with the prospect of simultaneously reproducing the units of gas density, mass and volumetric heat of gas combustion direct method with the highest possible accuracy has been proposed, that will insure traceability to units of the New SI system. The use of the method of differential weighing and providing a quasi-stable thermodynamic state for the implementation of the reference densimeter is justified. To ensure the reproduction of the gas volumetric heat combustion unit, a piston-type volumetric gas flow calibrator is used, constructed on the principle of parallel use of three identical piston sections. Such a design will enable to provide a stable value of the volumetric flow of gas entering the calorimeter burning column. The calorimeter should contain elements to control the security parameters the stoichiometric combustion. It is proposed to use a set of standard gas mixtures together with direct-acting comparators to realize the transfer of units to the lower levels of the traceability chain.
Наведено обґрунтування необхідності розвитку в Україні галузі метрологічного забезпечення засобів вимірювання теплоти згоряння та густини природного газу. Проведено аналіз діючих державних первинних еталонів одиниць енергії та молярної частки газових компонентів стосовно можливості реалізації відтворення зазначених одиниць. Надано аргументи щодо необхідності проведення оцінки відповідності зазначених засобів згідно з вимогами Технічних регламентів. Наведено приклад реалізації відтворення одиниць теплоти згоряння та густини природного газу в Німеччині в рамках реалізації GERG project. Запропоновано концепцію побудови еталонного комплексу на базі гравіметричної установки з перспективою відтворення одночасно одиниць густини газу, масової та об’ємної теплоти згоряння газу прямим методом із максимально можливою точністю, що забезпечить простежуваність до одиниць системи New SI. Обґрунтовано застосування методу диференційного зважування та забезпечення квазістабільного термодинамічного стану для реалізації еталонного густиноміра. Для забезпечення відтворення одиниці об’ємної теплоти згоряння газу застосовано калібратор об’ємної витрати газу поршневого типу, побудованого за принципом паралельного використання трьох ідентичних поршневих секцій. Така конструкція дасть можливість забезпечити стабільне значення об’ємної витрати газу, який потрапляє в калориметричну колонку для спалювання. Калориметрична колонка повинна містити елементи для контролю параметрів забезпечення стехіометричного горіння. Запропоновано використання набору еталонних газових сумішей у комплекті з компараторами прямої дії для реалізації передавання одиниць до нижчих щаблів ланцюга простежуваності.
Titel: |
Ways of reproduction and transfer of the natural gas combustion heat and density units in Ukraine
|
---|---|
Link: | |
Zeitschrift: | Український метрологічний журнал, 2018-12-29 |
Veröffentlichung: | ННЦ "Институт метрологии", 2018 |
Medientyp: | unknown |
ISSN: | 2306-7039 (print) ; 2522-1345 (print) |
Schlagwort: |
|
Sonstiges: |
|